[U-Boot] [PULL] Please pull u-boot-imx

From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PULL] Please pull u-boot-imx
Date: Mon, 15 Jan 2018 19:00:13 -0500	[thread overview]
Message-ID: <20180116000013.GJ4660@bill-the-cat> (raw)
In-Reply-To: <a2c2aad0-ce9e-8eed-719f-3be82a0a24db@denx.de>

On Mon, Jan 15, 2018 at 06:52:01PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 373b9003410b44a1133060c2e63483b278fb476b:
> 
>   Merge git://git.denx.de/u-boot-sunxi (2018-01-11 14:14:19 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 9587b0d61133c025d48ebf480aa021fc2fdd53a7:
> 
>   arm: imx: hab: Add hab_failsafe console command (2018-01-14 17:26:30
> +0100)
> 

Applied to u-boot/master, thanks!

But please note that checkpatch has a lot to say, some of which should
probably be addressed:

WARNING: please write a paragraph that describes the config symbol fully
#51: FILE: arch/arm/mach-imx/mx6/Kconfig:380:
+config TARGET_SKSIMX6

WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#67: 
new file mode 100644

WARNING: line over 80 characters
#171: FILE: board/sks-kinkel/sksimx6/sksimx6.c:62:
+	IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)),/* CD */

CHECK: Blank lines aren't necessary after an open brace '{'
#215: FILE: board/sks-kinkel/sksimx6/sksimx6.c:106:
+{
+

CHECK: Blank lines aren't necessary before a close brace '}'
#245: FILE: board/sks-kinkel/sksimx6/sksimx6.c:136:
+
+}

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#249: FILE: board/sks-kinkel/sksimx6/sksimx6.c:140:
+	uint32_t base = IMX_FEC_BASE;

CHECK: Alignment should match open parenthesis
#261: FILE: board/sks-kinkel/sksimx6/sksimx6.c:152:
+	phydev = phy_find_by_mask(bus, (0xf << CONFIG_FEC_MXC_PHYADDR),
+					PHY_INTERFACE_MODE_RGMII);

WARNING: unnecessary whitespace before a quoted newline
#333: FILE: board/sks-kinkel/sksimx6/sksimx6.c:224:
+		printf("Warning: failed to initialize mmc dev \n");

CHECK: Please don't use multiple blank lines
#350: FILE: board/sks-kinkel/sksimx6/sksimx6.c:241:
+
+

WARNING: line over 80 characters
#471: FILE: board/sks-kinkel/sksimx6/sksimx6.c:362:
+		mx6_dram_cfg(&mem_qdl, &mx6dl_1g_mmdc_calib, &mt41k128m16jt_125);

CHECK: Please don't use multiple blank lines
#601: FILE: include/configs/sksimx6.h:7:
+
+

WARNING: please, no space before tabs
#670: FILE: include/configs/sksimx6.h:76:
+^I"addmisc=setenv bootargs ${bootargs} ${miscargs}\0" ^I^I\$

WARNING: please, no space before tabs
#675: FILE: include/configs/sksimx6.h:81:
+^I"fdt_addr_r=0x18000000\0" ^I^I^I^I^I\$

WARNING: please, no space before tabs
#677: FILE: include/configs/sksimx6.h:83:
+^I"fdt_high=0xffffffff\0" ^I^I^I^I^I\$

WARNING: please, no space before tabs
#678: FILE: include/configs/sksimx6.h:84:
+^I"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" ^I^I\$

WARNING: please, no space before tabs
#681: FILE: include/configs/sksimx6.h:87:
+^I"mmcboot=if run mmcload;then " ^I^I^I^I^I\$

WARNING: please, no space before tabs
#683: FILE: include/configs/sksimx6.h:89:
+^I^I^I"bootm;fi\0" ^I^I^I^I^I\$

total: 0 errors, 11 warnings, 6 checks, 611 lines checked
WARNING: line over 80 characters
#38: FILE: drivers/misc/mxc_ocotp.c:356:
+			printf("mxc_ocotp: The word has been programmed, no more write\n");

total: 0 errors, 1 warnings, 0 checks, 23 lines checked
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#34: 
new file mode 100644

WARNING: line over 80 characters
#549: FILE: arch/arm/dts/imx6sx-sdb.dtsi:367:
+				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91

WARNING: line over 80 characters
#555: FILE: arch/arm/dts/imx6sx-sdb.dtsi:373:
+				MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000

WARNING: line over 80 characters
#585: FILE: arch/arm/dts/imx6sx-sdb.dtsi:403:
+				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1

WARNING: line over 80 characters
#586: FILE: arch/arm/dts/imx6sx-sdb.dtsi:404:
+				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1

WARNING: line over 80 characters
#592: FILE: arch/arm/dts/imx6sx-sdb.dtsi:410:
+				MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1

WARNING: line over 80 characters
#593: FILE: arch/arm/dts/imx6sx-sdb.dtsi:411:
+				MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1

WARNING: line over 80 characters
#599: FILE: arch/arm/dts/imx6sx-sdb.dtsi:417:
+				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1

WARNING: line over 80 characters
#600: FILE: arch/arm/dts/imx6sx-sdb.dtsi:418:
+				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1

WARNING: line over 80 characters
#640: FILE: arch/arm/dts/imx6sx-sdb.dtsi:458:
+				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000

WARNING: line over 80 characters
#740: FILE: arch/arm/dts/imx6sx-sdb.dtsi:558:
+				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */

WARNING: line over 80 characters
#741: FILE: arch/arm/dts/imx6sx-sdb.dtsi:559:
+				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */

WARNING: line over 80 characters
#783: FILE: arch/arm/dts/imx6sx-sdb.dtsi:601:
+				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */

WARNING: line over 80 characters
#784: FILE: arch/arm/dts/imx6sx-sdb.dtsi:602:
+				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */

total: 0 errors, 14 warnings, 0 checks, 757 lines checked
WARNING: 'framwork' may be misspelled - perhaps 'framework'?
#7: 
framwork now and wdog reset will be triggered once set WDOG_B mux

WARNING: 'framwork' may be misspelled - perhaps 'framework'?
#49: FILE: board/freescale/mx6sxsabresd/mx6sxsabresd.c:306:
+	 * framwork now and wdog reset will be triggered once set WDOG_B mux

total: 0 errors, 2 warnings, 0 checks, 33 lines checked
WARNING: line over 80 characters
#95: FILE: arch/arm/mach-imx/mx5/clock.c:918:
+static int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])

total: 0 errors, 1 warnings, 0 checks, 85 lines checked
CHECK: Alignment should match open parenthesis
#60: FILE: board/toradex/apalis_imx6/pf0100.c:214:
+static int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc,
 		char * const argv[])

CHECK: Alignment should match open parenthesis
#109: FILE: board/toradex/colibri_imx6/pf0100.c:196:
+static int do_pf0100_prog(cmd_tbl_t *cmdtp, int flag, int argc,
 		char * const argv[])

total: 0 errors, 0 warnings, 2 checks, 79 lines checked
WARNING: line over 80 characters
#56: FILE: include/configs/cm_fx6.h:158:
+		"if test $board_name = Utilite && test $board_rev = MX6Q ; then " \

total: 0 errors, 1 warnings, 0 checks, 26 lines checked
CHECK: Prefer kernel type 'u32' over 'uint32_t'
#45: FILE: arch/arm/include/asm/mach-imx/hab.h:148:
+int authenticate_image(uint32_t ddr_start, uint32_t image_size);

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#57: FILE: arch/arm/mach-imx/hab.c:413:
+int authenticate_image(uint32_t ddr_start, uint32_t image_size)

total: 0 errors, 0 warnings, 2 checks, 15 lines checked
WARNING: Prefer using '"%s...", __func__' to using 'authenticate_image', this function's name, in a string
#95: FILE: arch/arm/mach-imx/hab.c:465:
+		puts("\nCalling authenticate_image in ROM\n");

total: 0 errors, 1 warnings, 0 checks, 160 lines checked
WARNING: Prefer using '"%s...", __func__' to using 'authenticate_image', this function's name, in a string
#85: FILE: arch/arm/mach-imx/hab.c:469:
+	puts("\nCalling authenticate_image in ROM\n");

total: 0 errors, 1 warnings, 0 checks, 135 lines checked
CHECK: Prefer kernel type 'u32' over 'uint32_t'
#67: FILE: arch/arm/include/asm/mach-imx/hab.h:151:
+int authenticate_image(uint32_t ddr_start, uint32_t image_size,

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#159: FILE: arch/arm/mach-imx/hab.c:386:
+int authenticate_image(uint32_t ddr_start, uint32_t image_size,

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#165: FILE: arch/arm/mach-imx/hab.c:391:
+	uint32_t ivt_addr = 0;

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#252: FILE: arch/arm/mach-imx/spl.c:192:
+	uint32_t offset;

total: 0 errors, 0 warnings, 4 checks, 188 lines checked
CHECK: Prefer kernel type 'u8' over 'uint8_t'
#49: FILE: arch/arm/include/asm/mach-imx/hab.h:25:
+	uint8_t		magic;

CHECK: Prefer kernel type 'u16' over 'uint16_t'
#50: FILE: arch/arm/include/asm/mach-imx/hab.h:26:
+	uint16_t	length;

CHECK: Prefer kernel type 'u8' over 'uint8_t'
#51: FILE: arch/arm/include/asm/mach-imx/hab.h:27:
+	uint8_t		version;

WARNING: __packed is preferred over __attribute__((packed))
#52: FILE: arch/arm/include/asm/mach-imx/hab.h:28:
+} __attribute__((packed));

WARNING: Adding new packed members is to be done with care
#52: FILE: arch/arm/include/asm/mach-imx/hab.h:28:
+} __attribute__((packed));

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#56: FILE: arch/arm/include/asm/mach-imx/hab.h:32:
+	uint32_t entry;		/* Absolute address of first instruction */

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#57: FILE: arch/arm/include/asm/mach-imx/hab.h:33:
+	uint32_t reserved1;	/* Reserved should be zero */

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#58: FILE: arch/arm/include/asm/mach-imx/hab.h:34:
+	uint32_t dcd;		/* Absolute address of the image DCD */

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#59: FILE: arch/arm/include/asm/mach-imx/hab.h:35:
+	uint32_t boot;		/* Absolute address of the boot data */

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#60: FILE: arch/arm/include/asm/mach-imx/hab.h:36:
+	uint32_t self;		/* Absolute address of the IVT */

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#61: FILE: arch/arm/include/asm/mach-imx/hab.h:37:
+	uint32_t csf;		/* Absolute address of the CSF */

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#62: FILE: arch/arm/include/asm/mach-imx/hab.h:38:
+	uint32_t reserved2;	/* Reserved should be zero */

total: 0 errors, 2 warnings, 10 checks, 34 lines checked
CHECK: Prefer kernel type 'u8' over 'uint8_t'
#172: FILE: arch/arm/mach-imx/hab.c:212:
+static uint8_t hab_statuses[5] = {

CHECK: Prefer kernel type 'u8' over 'uint8_t'
#181: FILE: arch/arm/mach-imx/hab.c:220:
+static uint8_t hab_reasons[26] = {

CHECK: Prefer kernel type 'u8' over 'uint8_t'
#190: FILE: arch/arm/mach-imx/hab.c:249:
+static uint8_t hab_contexts[12] = {

CHECK: Prefer kernel type 'u8' over 'uint8_t'
#199: FILE: arch/arm/mach-imx/hab.c:264:
+static uint8_t hab_engines[16] = {

CHECK: Prefer kernel type 'u8' over 'uint8_t'
#208: FILE: arch/arm/mach-imx/hab.c:295:
+static void process_event_record(uint8_t *event_data, size_t bytes)

CHECK: Prefer kernel type 'u8' over 'uint8_t'
#217: FILE: arch/arm/mach-imx/hab.c:305:
+static void display_event(uint8_t *event_data, size_t bytes)

total: 0 errors, 0 warnings, 6 checks, 213 lines checked
CHECK: Prefer kernel type 'u32' over 'uint32_t'
#38: FILE: arch/arm/include/asm/mach-imx/hab.h:188:
+int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size,

CHECK: Prefer kernel type 'u32' over 'uint32_t'
#61: FILE: arch/arm/mach-imx/hab.c:438:
+int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size,

total: 0 errors, 0 warnings, 2 checks, 38 lines checked
-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180115/14e9c2ed/attachment.sig>