[U-Boot] [PULL] Please pull u-boot-imx

From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PULL] Please pull u-boot-imx
Date: Wed, 16 Aug 2017 13:18:40 +0200	[thread overview]
Message-ID: <3fc6b9db-6ce3-8f2b-7af4-7eadb8c69c4f@denx.de> (raw)

Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit f19955a01482d118eac0fdaf530ec6e5b08cf414:

  Merge git://git.denx.de/u-boot-uniphier (2017-07-26 11:29:25 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to e872f27a020f353dd334fc025999466adf5ae18c:

  imx: mx7: fix build warning when CONFIG_IMX_RDC not enabled
(2017-08-16 12:43:09 +0200)

----------------------------------------------------------------
Anatolij Gustschin (2):
      imx6: use SION macro in SDn_CMD mux mode bitfield arguments
      imx6: clock: correct comment for PLL_VIDEO

Breno Lima (2):
      mx6sabresd: Fix IOMUXC_GPR6 and IOMUXC_GPR7 values
      mx6sabreauto: Fix IOMUXC_GPR6 and IOMUXC_GPR7 values

Lothar Waßmann (1):
      net: fec_mxc: adjust prototype of fec_get_miibus() for DM_ETH

Peng Fan (7):
      ARM: i.MX6: exclude the ARM errata from i.MX6 UP system
      arm: Implement workaround for Cortex-A9 errata 845369
      imx: mx6: select ARM_ERRATA_845369
      imx: mx6: soc: fix mx6sll settings
      imx: mx6sx: select OSC as uart's clk parent
      imx: mx6sl: simplify code using setbits_le32
      imx: mx7: fix build warning when CONFIG_IMX_RDC not enabled

Stefano Babic (1):
      mx6: Add support for Phytec pfla02 (NAND)

Sébastien Szymanski (2):
      imx: imx6ul: correct get_cpu_speed_grade_hz on 696MHz SoCs
      imx: imx6ull: correct get_cpu_speed_grade_hz

Vagrant Cascadian (1):
      arm: imx: Enable booting from SATA on wandboard.

 arch/arm/Kconfig                            |   3 +
 arch/arm/cpu/armv7/start.S                  |   6 +
 arch/arm/include/asm/arch-mx6/mx6q_pins.h   |   8 +-
 arch/arm/mach-imx/mx6/Kconfig               |  22 +++-
 arch/arm/mach-imx/mx6/clock.c               |   2 +-
 arch/arm/mach-imx/mx6/soc.c                 |  55 ++++++----
 arch/arm/mach-imx/mx7/soc.c                 |   7 +-
 board/freescale/mx6sabreauto/mx6sabreauto.c |   4 +-
 board/freescale/mx6sabresd/mx6sabresd.c     |   4 +-
 board/phytec/pfla02/Kconfig                 |  12 ++
 board/phytec/pfla02/MAINTAINERS             |   6 +
 board/phytec/pfla02/Makefile                |   9 ++
 board/phytec/pfla02/README                  |  24 ++++
 board/phytec/pfla02/pfla02.c                | 698
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 configs/pfla02_defconfig                    |  50 +++++++++
 drivers/net/fec_mxc.c                       |   9 ++
 include/configs/pfla02.h                    | 179
++++++++++++++++++++++++++++++
 include/configs/wandboard.h                 |   1 +
 include/netdev.h                            |   5 +
 19 files changed, 1069 insertions(+), 35 deletions(-)
 create mode 100644 board/phytec/pfla02/Kconfig
 create mode 100644 board/phytec/pfla02/MAINTAINERS
 create mode 100644 board/phytec/pfla02/Makefile
 create mode 100644 board/phytec/pfla02/README
 create mode 100644 board/phytec/pfla02/pfla02.c
 create mode 100644 configs/pfla02_defconfig
 create mode 100644 include/configs/pfla02.h

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================