[U-Boot] [PULL] Please pull u-boot-imx

From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PULL] Please pull u-boot-imx
Date: Sun, 15 Apr 2018 12:28:54 +0200	[thread overview]
Message-ID: <f54ee0fd-53bf-a5b8-29c2-c0ec8ef3d827@denx.de> (raw)

Hi Tom,

please pull from u-boot-imx, thanks !

-- The following changes since commit
6d7403bf72b5ea46497fe8222d0303cb79563379:

  doc: mxc_hab: Update i.MX HAB documentation (2018-03-11 16:00:21 +0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to b4e9bdcd05ac83146ad16802a94db3e78f530d1a:

  mx6cuboxi: Fix some memory configuration errors (2018-04-15 11:56:21
+0200)

----------------------------------------------------------------
Anatolij Gustschin (1):
      imx: fix CAAM base for i.MX6UL

Bryan O'Donoghue (6):
      imx: mx7: Fix CONFIG_SERIAL_TAG compilation
      imx: mx7: Add comment to describe OTP TESTER registers
      warp7: Set u-boot serial# based on OTP value
      imximage: Encase majority of header in __ASSEMBLY__ declaration
      imx: hab: Provide hab_auth_img_or_fail command
      imx: mx7: snvs: Add an SNVS init routine

Eran Matityahu (4):
      mx7_common: Fix SPL compilation with secure boot support enabled
      Makefile: Build firmware-ivt image type for HAB verification also
for mx7
      imx7: Add src_base structure define macro
      imx7: spl: Check for Serial Downloader in spl_boot_device

Heinrich Schuchardt (1):
      wandboard: remove superfluous include

Ian Ray (1):
      board: ge: bx50v3: enable backlight on demand

Jon Nettleton (1):
      mx6cuboxi: Fix some memory configuration errors

JÃ¶rg Krause (2):
      ARM: dts: imx6ul: add wdog3
      ARM: dts: imx6ull: add wdog3

Ken Lin (1):
      arm: imx: Add Winbond SPI-NOR support for Advantech DMS-BA16 board

Lukasz Majewski (2):
      imx: board: Add support for the K+P's kp_imx6q_tpc board
      boot: script: The boot.scr file for K+P's boards

Marek Vasut (1):
      ARM: mx6: ddr: Add write leveling correction code

Nandor Han (1):
      board: ge: ppd: Fix environment variable location

Rasmus Villemoes (2):
      Makefile: always preserve output for images that can contain HAB
Blocks
      tools/imximage: use 0x prefix in HAB Blocks line

Sriram Dash (2):
      drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in Kconfig
      drivers: i2c: mxc: Update support to 8 I2C controllers

Tom Rini (2):
      imx31_phycore: Delete
      mx31ads: Delete

Trent Piepho (1):
      imx: Create distinct pre-processed mkimage config files

Vanessa Maegima (1):
      pico-imx7d: Replace fatload command

 Makefile                                  |   8 +-
 arch/arm/Kconfig                          |  18 ----
 arch/arm/cpu/armv8/fsl-layerscape/Kconfig |  23 +++++
 arch/arm/dts/imx6ul.dtsi                  |   8 ++
 arch/arm/dts/imx6ull.dtsi                 |   8 ++
 arch/arm/include/asm/arch-mx6/imx-regs.h  |   4 +
 arch/arm/include/asm/arch-mx7/imx-regs.h  |   2 +
 arch/arm/include/asm/mach-imx/sys_proto.h |   1 +
 arch/arm/mach-imx/Makefile                |  15 +--
 arch/arm/mach-imx/hab.c                   |  35 +++++++
 arch/arm/mach-imx/mx6/Kconfig             |  11 ++
 arch/arm/mach-imx/mx6/ddr.c               |  24 +++++
 arch/arm/mach-imx/mx7/Makefile            |   2 +-
 arch/arm/mach-imx/mx7/snvs.c              |  22 ++++
 arch/arm/mach-imx/mx7/soc.c               |  24 +++++
 arch/arm/mach-imx/spl.c                   |  23 +++++
 board/freescale/mx31ads/Kconfig           |  15 ---
 board/freescale/mx31ads/MAINTAINERS       |   6 --
 board/freescale/mx31ads/Makefile          |   8 --
 board/freescale/mx31ads/lowlevel_init.S   | 268
------------------------------------------------
 board/freescale/mx31ads/mx31ads.c         | 114 ---------------------
 board/freescale/mx31ads/u-boot.lds        | 110 --------------------
 board/ge/bx50v3/bx50v3.c                  |  45 ++++----
 board/imx31_phycore/Kconfig               |  12 ---
 board/imx31_phycore/MAINTAINERS           |  11 --
 board/imx31_phycore/Makefile              |   9 --
 board/imx31_phycore/imx31_phycore.c       | 154
----------------------------
 board/imx31_phycore/lowlevel_init.S       |  88 ----------------
 board/k+p/bootscripts/tpcboot.cmd         |  96 ++++++++++++++++++
 board/k+p/kp_imx6q_tpc/Kconfig            |  12 +++
 board/k+p/kp_imx6q_tpc/MAINTAINERS        |   6 ++
 board/k+p/kp_imx6q_tpc/Makefile           |  11 ++
 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c     | 302
++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c | 338
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/solidrun/mx6cuboxi/mx6cuboxi.c      |   3 +-
 board/wandboard/wandboard.c               |   1 -
 board/warp7/warp7.c                       |  14 +++
 configs/dms-ba16-1g_defconfig             |   1 +
 configs/dms-ba16_defconfig                |   1 +
 configs/imx31_phycore_defconfig           |  19 ----
 configs/imx31_phycore_eet_defconfig       |  25 -----
 configs/kp_imx6q_tpc_defconfig            |  42 ++++++++
 configs/mx31ads_defconfig                 |  15 ---
 configs/pico-imx7d_defconfig              |   1 +
 doc/README.mxc_hab                        |  14 +--
 drivers/i2c/Kconfig                       | 169
++++++++++++++++++++++++++++++-
 drivers/i2c/mxc_i2c.c                     |  56 ++++++++++
 drivers/video/Makefile                    |   1 -
 drivers/video/s6e63d6.c                   |  60 -----------
 include/configs/ge_bx50v3.h               |   1 +
 include/configs/imx31_phycore.h           | 156
----------------------------
 include/configs/kp_imx6q_tpc.h            | 141 ++++++++++++++++++++++++++
 include/configs/ls1012a_common.h          |   3 -
 include/configs/ls1043a_common.h          |   5 -
 include/configs/ls1046a_common.h          |   5 -
 include/configs/ls1088a_common.h          |   5 -
 include/configs/ls2080a_common.h          |   5 -
 include/configs/ls2080a_emu.h             |   3 -
 include/configs/ls2080a_simu.h            |   3 -
 include/configs/mx31ads.h                 | 145 --------------------------
 include/configs/mx53ppd.h                 |   4 +-
 include/configs/mx7_common.h              |   3 +
 include/configs/pico-imx7d.h              |   4 +-
 include/configs/warp7.h                   |   3 +
 include/imximage.h                        |   2 +
 include/s6e63d6.h                         |  21 ----
 scripts/Makefile.lib                      |   2 +-
 scripts/Makefile.spl                      |   2 +-
 tools/imximage.c                          |   2 +-
 69 files changed, 1439 insertions(+), 1331 deletions(-)
 create mode 100644 arch/arm/mach-imx/mx7/snvs.c
 delete mode 100644 board/freescale/mx31ads/Kconfig
 delete mode 100644 board/freescale/mx31ads/MAINTAINERS
 delete mode 100644 board/freescale/mx31ads/Makefile
 delete mode 100644 board/freescale/mx31ads/lowlevel_init.S
 delete mode 100644 board/freescale/mx31ads/mx31ads.c
 delete mode 100644 board/freescale/mx31ads/u-boot.lds
 delete mode 100644 board/imx31_phycore/Kconfig
 delete mode 100644 board/imx31_phycore/MAINTAINERS
 delete mode 100644 board/imx31_phycore/Makefile
 delete mode 100644 board/imx31_phycore/imx31_phycore.c
 delete mode 100644 board/imx31_phycore/lowlevel_init.S
 create mode 100644 board/k+p/bootscripts/tpcboot.cmd
 create mode 100644 board/k+p/kp_imx6q_tpc/Kconfig
 create mode 100644 board/k+p/kp_imx6q_tpc/MAINTAINERS
 create mode 100644 board/k+p/kp_imx6q_tpc/Makefile
 create mode 100644 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
 create mode 100644 board/k+p/kp_imx6q_tpc/kp_imx6q_tpc_spl.c
 delete mode 100644 configs/imx31_phycore_defconfig
 delete mode 100644 configs/imx31_phycore_eet_defconfig
 create mode 100644 configs/kp_imx6q_tpc_defconfig
 delete mode 100644 configs/mx31ads_defconfig
 delete mode 100644 drivers/video/s6e63d6.c
 delete mode 100644 include/configs/imx31_phycore.h
 create mode 100644 include/configs/kp_imx6q_tpc.h
 delete mode 100644 include/configs/mx31ads.h
 delete mode 100644 include/s6e63d6.h

=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================