[U-Boot] [PULL] : Please pull u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit bd23b22badadcdc414a900828253961fc5ec6c39:

  Merge branch 'agust at denx.de-next' of git://git.denx.de/u-boot-staging
(2012-10-15 13:37:22 -0700)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 01968b96a24414ff8f0735111907cbb750c7af43:

  MX5: fix warning in clock.c (2012-10-26 16:11:32 +0200)

----------------------------------------------------------------
Beno?t Th?baudeau (4):
      mx35: Clean up lowlevel_init
      mx35: Fix eSDHC clocks
      mxc: Fix SDHC multi-instance clock
      mx25: Clean up imx-regs.h

Dirk Behme (1):
      mx6qsabrelite: enable DCache and MMC bounce buffer

Eric Nelson (7):
      i.MX: iomux: input pad array can be const
      i.MX: declare iomux_v3_cfg_t arrays as const
      i.MX video: struct fb_videomode can be const
      i.MX: ipufb: add const to fb_videomode declarations
      i.MX6: set drive strength for parallel RGB pads
      i.MX6: add HDMI transmitter register declarations from kernel WIP.
      i.MX6: mx6qsabrelite: Add splash screen support

Fabio Estevam (11):
      mx6qsabreauto: Pass the board revision to the kernel
      mx5: lowlevel_init.S: Split init_clock macro
      mx5: lowlevel_init.S: Fix PLL settings for mx53
      mx53loco: Adapt the IPU clock
      configs: mx53loco: Remove CONFIG_HAS_ETH1
      configs: mx51evk: Remove CONFIG_HAS_ETH1
      configs: mx53evk: Remove CONFIG_HAS_ETH1
      mx5: Add workaround for ARM erratum ID 468414
      mx25pdk: Use internal RAM for stack pointer
      mx6qsabre_common: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFER

Otavio Salvador (1):
      mx6qsabreauto: Change mmcroot so it works out of box

Stefano Babic (1):
      MX5: fix warning in clock.c

Troy Kisky (7):
      imximage: check dcd_len as entries added
      imximage: remove redundant setting of app_dest_ptr
      imximage: move flash_offset check to common location
      imximage: fix size of image to load.
      imximage: delay setting of image size
      imximage: change parameters to set_imx_hdr
      imximage: make set_imx_hdr_v1/v2 easier to read

 arch/arm/cpu/arm1136/mx35/generic.c             |   14 +-
 arch/arm/cpu/armv7/mx5/clock.c                  |    2 +-
 arch/arm/cpu/armv7/mx5/lowlevel_init.S          |  158 +++-
 arch/arm/imx-common/iomux-v3.c                  |    5 +-
 arch/arm/include/asm/arch-mx25/imx-regs.h       |    6 +-
 arch/arm/include/asm/arch-mx35/clock.h          |    4 +-
 arch/arm/include/asm/arch-mx35/lowlevel_macro.S |  191 ++--
 arch/arm/include/asm/arch-mx5/imx-regs.h        |    4 +
 arch/arm/include/asm/arch-mx6/imx-regs.h        |    6 +
 arch/arm/include/asm/arch-mx6/mx6x_pins.h       |   58 +-
 arch/arm/include/asm/arch-mx6/mxc_hdmi.h        | 1053
+++++++++++++++++++++++
 arch/arm/include/asm/imx-common/iomux-v3.h      |    3 +-
 board/CarMediaLab/flea3/lowlevel_init.S         |   41 -
 board/esg/ima3-mx53/ima3-mx53.c                 |    1 +
 board/freescale/mx35pdk/lowlevel_init.S         |  119 +--
 board/freescale/mx35pdk/mx35pdk.c               |    2 +
 board/freescale/mx35pdk/mx35pdk.h               |   25 -
 board/freescale/mx51evk/mx51evk.c               |    6 +-
 board/freescale/mx53ard/mx53ard.c               |    4 +
 board/freescale/mx53evk/mx53evk.c               |    4 +
 board/freescale/mx53loco/mx53loco.c             |    5 +-
 board/freescale/mx53smd/mx53smd.c               |    3 +
 board/freescale/mx6qarm2/mx6qarm2.c             |   12 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c   |   55 +-
 board/freescale/mx6qsabrelite/mx6qsabrelite.c   |  350 +++++++-
 board/freescale/mx6qsabresd/mx6qsabresd.c       |    7 +-
 board/genesi/mx51_efikamx/efikamx.c             |   20 +-
 board/ttcontrol/vision2/vision2.c               |    4 +-
 drivers/mmc/fsl_esdhc.c                         |    5 +-
 drivers/video/mxc_ipuv3_fb.c                    |    8 +-
 include/configs/mx25pdk.h                       |   11 +-
 include/configs/mx51evk.h                       |    1 -
 include/configs/mx53evk.h                       |    1 -
 include/configs/mx53loco.h                      |    3 +-
 include/configs/mx6qarm2.h                      |    3 +-
 include/configs/mx6qsabre_common.h              |    5 +-
 include/configs/mx6qsabreauto.h                 |    3 +-
 include/configs/mx6qsabrelite.h                 |   18 +-
 include/configs/mx6qsabresd.h                   |    1 +
 include/fsl_esdhc.h                             |    1 +
 include/ipu_pixfmt.h                            |    4 +-
 tools/imximage.c                                |  102 +--
 tools/imximage.h                                |    6 +-
 43 files changed, 1853 insertions(+), 481 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-mx6/mxc_hdmi.h

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================