[U-Boot] [PULL] : Please pull u-boot-imx

From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PULL] : Please pull u-boot-imx
Date: Thu, 02 Jan 2014 17:25:29 +0100	[thread overview]
Message-ID: <52C592F9.5000604@denx.de> (raw)

Hi Albert,

my first pull-request in 2014 ! Please pull from u-boot-imx, thanks !

The following changes since commit 56eb3da43fab5990a4b7bc118b76c7cae2ceb140:

  arm, am335x: update for the siemens boards (2013-11-12 09:53:59 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 02229827804980e3cce48bf4fce43699046bcf7e:

  mx6: soc: Disable VDDPU regulator (2014-01-02 17:16:51 +0100)

----------------------------------------------------------------
Eric Nelson (8):
      i.MX6DQ/DLS: replace pad names with their Linux kernel equivalents
      i.MX6DQ/DLS: remove useless mux/pad declarations
      i.MX6DQ: Add Pinmux settings that are present in mainline and
Dual-Lite/Solo
      i.MX6DQ/DLS: remove unused pad declarations
      i.MX6DQ/DLS: whitespace: Align IOMUX_PAD column in declarations
      imx-common: remove extraneous semicolon from macro
      i.MX6 (DQ/DLS): use macros for mux and pad declarations
      ARM: mx6: Update non-Freescale boards to include CPU errata.

Fabio Estevam (24):
      configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
      wandboard: Return the error immediately when ipuv3_fb_init() fails
      wandboard: Return the error when cpu_eth_init() fails
      titanium: Return the error when cpu_eth_init() fails
      nitrogen6x: Remove unused OCOTP options
      mx51evk: Fix pmic_init() argument
      mx31pdk: Fix pmic_init() argument
      efikamx: Fix pmic_init() argument
      power: power_fsl: Pass p->bus in the same way for SPI and I2C cases
      mx6sabresd: Fix wrong colors in LVDS splash
      mx6sabresd: Add SPI NOR support
      imx: Explicitly pass the I2C bus number in pmic_init()
      configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
      mx6: clock: Fix the calculation of PLL_ENET frequency
      mx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK signals
      mx6sabresd: Fix LVDS width and color format
      doc: README.fuse: Add an example on how to use the fuse API on mx6q
      mx6sabre_common.h: Add CONFIG_CMD_FUSE support
      mx6: soc: Staticize set_vddsoc()
      mx6: soc: Clear the LDO ramp values up prior to setting the LDO
voltages
      mx6: soc: Set the VDDSOC at 1.175 V
      mx6: soc: Introduce set_ldo_voltage()
      mx6: soc: Add the required LDO ramp up delay
      mx6: soc: Disable VDDPU regulator

Frank Li (1):
      imx6: fix random hang when download by usb

Giuseppe Pagano (5):
      udoo: Move and optimize platform register setting.
      udoo: Add ethernet support (FEC + Micrel KSZ9031).
      udoo: Fix watchdog during kernel boot.
      nitrogen6x: Move setup_sata to common part
      udoo: Add SATA support on uDoo Board.

Liu Ying (1):
      MX6 SabreSD: Use readl() to read the CCM_CCGR3 register

Marek Vasut (3):
      Net: FEC: Fix huge memory leak
      ARM: mx53: video: Add IPUv3 LCD support for M53EVK
      ARM: mxs: tools: Fix errno handling in strtoul() invocation

Michael Heimpold (1):
      mxs_gpio: fix the handling in gpio_direction_output()

Stefan Roese (1):
      mx6: titanium: Move BSP code to barco board directory

Stefano Babic (1):
      MX6: fix sata compilation for i.MX6

 arch/arm/cpu/armv7/mx6/clock.c                   |    2 +-
 arch/arm/cpu/armv7/mx6/soc.c                     |  110 +-
 arch/arm/imx-common/Makefile                     |    3 +
 arch/arm/imx-common/cpu.c                        |    4 +-
 arch/arm/imx-common/sata.c                       |   34 +
 arch/arm/include/asm/arch-mx6/crm_regs.h         |    1 +
 arch/arm/include/asm/arch-mx6/imx-regs.h         |   23 +
 arch/arm/include/asm/arch-mx6/mx6-pins.h         |   33 +-
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h       | 2728
+++++++++-------------
 arch/arm/include/asm/arch-mx6/mx6q_pins.h        | 2642
++++++++-------------
 arch/arm/include/asm/arch-mx6/sys_proto.h        |    2 -
 arch/arm/include/asm/imx-common/sata.h           |   16 +
 board/{freescale => barco}/titanium/Makefile     |    0
 board/{freescale => barco}/titanium/imximage.cfg |    0
 board/{freescale => barco}/titanium/titanium.c   |  110 +-
 board/boundary/nitrogen6x/nitrogen6x.c           |  197 +-
 board/congatec/cgtqmx6eval/cgtqmx6eval.c         |   40 +-
 board/denx/m53evk/m53evk.c                       |   73 +
 board/freescale/mx25pdk/mx25pdk.c                |    2 +-
 board/freescale/mx31pdk/mx31pdk.c                |    2 +-
 board/freescale/mx35pdk/mx35pdk.c                |    2 +-
 board/freescale/mx51evk/mx51evk.c                |    2 +-
 board/freescale/mx53evk/mx53evk.c                |    2 +-
 board/freescale/mx53loco/mx53loco.c              |    2 +-
 board/freescale/mx6qarm2/mx6qarm2.c              |   68 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c    |   62 +-
 board/freescale/mx6sabresd/mx6sabresd.c          |  155 +-
 board/genesi/mx51_efikamx/efikamx.c              |    2 +-
 board/udoo/1066mhz_4x256mx16.cfg                 |   55 +
 board/udoo/clocks.cfg                            |   32 +
 board/udoo/ddr-setup.cfg                         |   87 +
 board/udoo/udoo.c                                |  165 +-
 board/udoo/udoo.cfg                              |   29 +
 board/wandboard/wandboard.c                      |   60 +-
 boards.cfg                                       |    4 +-
 doc/README.imx6                                  |   76 +
 drivers/gpio/mxs_gpio.c                          |    4 +-
 drivers/net/fec_mxc.c                            |  177 +-
 drivers/power/power_fsl.c                        |    3 +-
 include/configs/imx31_phycore.h                  |    1 -
 include/configs/m53evk.h                         |   16 +
 include/configs/mx25pdk.h                        |    2 -
 include/configs/mx28evk.h                        |    1 -
 include/configs/mx31pdk.h                        |    1 -
 include/configs/mx35pdk.h                        |    2 -
 include/configs/mx51evk.h                        |    1 -
 include/configs/mx53ard.h                        |    1 -
 include/configs/mx53evk.h                        |    2 -
 include/configs/mx53loco.h                       |    2 -
 include/configs/mx53smd.h                        |    2 -
 include/configs/mx6_common.h                     |    1 +
 include/configs/mx6qarm2.h                       |    1 -
 include/configs/mx6sabre_common.h                |   18 +-
 include/configs/nitrogen6x.h                     |   11 +-
 include/configs/titanium.h                       |    1 +
 include/configs/udoo.h                           |   29 +
 include/configs/wandboard.h                      |    1 +
 include/micrel.h                                 |    5 +
 tools/mxsimage.c                                 |    1 +
 59 files changed, 3346 insertions(+), 3762 deletions(-)
 create mode 100644 arch/arm/imx-common/sata.c
 create mode 100644 arch/arm/include/asm/imx-common/sata.h
 rename board/{freescale => barco}/titanium/Makefile (100%)
 rename board/{freescale => barco}/titanium/imximage.cfg (100%)
 rename board/{freescale => barco}/titanium/titanium.c (66%)
 create mode 100644 board/udoo/1066mhz_4x256mx16.cfg
 create mode 100644 board/udoo/clocks.cfg
 create mode 100644 board/udoo/ddr-setup.cfg
 create mode 100644 board/udoo/udoo.cfg

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================